Otterbox 8000 Rigid Waterproof Enclosure - Suitable for RB3 and RB3S - Waterproof to 30 Metres - Clear, Yellow, Blue and Black - Fits the KTI Mini Sat Alert RB3S
For further information regarding this case, please visit - Otterbox - http://www.otterbox.com/products/otterbox/8000/index.htm
8000 Series:
Waterproof, crushproof and they float. Protect valuables from the elements. The 8000 series is great for storing small digital cameras, cell phones, GPS, and sunglasses. It also has a great belt clip for added convenience. OtterBox is the world leader in water-proof protection. You'll see why our slogan is "Never Out of Its Element."
Box Size:
- Outside - 7.6cm x 9.5cm x 14.6cm
- Inside - 6.4cm x 8.4cm x 13.8cm
Suggested Uses:
- Small Digital Camera, Mobile Phone, GPS, Sunglasses and Epirb (Beacon). Belt Clip provided for added convenience.
Warranty:
- Otter Boxes come with an Unconditional Lifetime Warranty. We guarantee it for life. No questions. No hassles.
- It's easy to stand by our products with an unconditional lifetime warranty because we are confident that they will last a lifetime.
- Warranty includes replacement of the case only. Otter Products cannot be held liable for damage to personal property due to misuse or improper care and maintenance of the case and o-rings.
Features:
- Silicone gasket for long lasting, watertight seal.
- Easy open latch.
- Convenient Belt Clip - Only available on 8000 and 9000 Series.
- HIgh quality rope lanyard.
Questions and Answers:
Q: How do I keep my OtterBox clean?
A: We suggest using a Q-tip to swab the seal free from dust and dirt that might cause the OtterBox to lose its effectiveness.
Q: To what depth are OtterBox waterproof to?
A: OtterBox are rated and guaranteed to 100 feet deep. Over 10 times as deep as our closest competitor!
Q: My OtterBox seems to be leaking, what could be the reason?
A: OtterBox have been tested to 100 feet and should not leak if cared for and used properly. First, make sure that your seal is completely clean. Use a Q-tip to remove any dirt or debris from the seal surface. Second, make certain that the objects you are placing in the case are not too big for the box and therefore pushing the box lid open which would compromise the sealing qualities of the box. If problem persists, contact customerservice@OtterBox.com for further diagnosis.
Q: Will the Pins used on my OtterBox Rust?
A: Our pins are made from marine grade 316 Stainless steel which is the standard choice for salt and freshwater applications. The pins are very rust resistant but can form surface rust in a corrosive environment. This surface rust is normal and should not damage the pin or weaken the case.
Q: Why won't my OtterBox Open?
A: Because OtterBox are airtight, significant changes in altitude or temperature can create a vacuum and cause the OtterBox to suck shut. To remedy this, insert a coin (on the smaller boxes) in the slot, next to the latch, on the front of the box. Twist the coin to equalize the pressure within the case. On the Otter Cases (the larger OtterBox) there is a purge knob on the front of the case that can be opened to equalize the pressure. Remember to retighten this knob when finished so that the case remains watertight.
Q: What material is used for the OtterBox?
A: The type of plastic used to make the colored OtterBoxes is an ABS plastic that’s reinforced with fiberglass. The type of plastic used to make clear OtterBoxes is high impact polycarbonate. All Otter Boxes (regardless of material used) offer the same protection.
Q: What is the foam lining made out of?
A: The material used to make the foam liners is open cell polypropylene foam.
Otterbox Rigid Enclosure
