KTI RB2 Sat-Alert 121.5 MHz and 243 MHz Aircraft Emergency Beacon with Mounting Bracket (Epirb) - 5 Year Warranty
Made in Australia - MANUAL ACTIVATION
These Emergency Beacons will work anywhere in the world
The RB2 EPIRB features an attention seeking strobe light and is supplied with a mounting bracket to allow attachment to an aircraft, boat or motor vehicle. Designed to float in water with a tether line attached to rescue craft or person, the RB2 transmits on both 121.5 MHz and 243 MHz international distress frequencies simultaneously for up to 4 days.
Technical Specifications:
Design: Designed for maximum impact resistance exceeding 100G.
Waterproof to a depth of greater than 3 metres. Floats with antenna vertical.
Frequencies: 121.5 and 243 MHz transmitted simultaneously, crystal locked.
Approvals: Approved to the latest Australian and New Zealand Standard AS/NZS 4330:2000 and the 1981 and 1983 SOLAS amendments.
Emission Spectrum: Coherent carrier fully compatible with COSPAS/SARSAT system.
Modulation Characteristics: Amplitude Modulated, Swept Tone.
Activation: Manual switch with Test facility and red LED Pilot Light.
Strobe Light: Two high intensity white light emitting diodes, flashed in an attention attracting multiple sequence.
Operating Temperature Range: From -20 degrees C to +55 degrees C, 4 days.
Batteries: Two long-life lithium C cells (sulphur dioxide free), with a greater than 10 year shelf life, recommended replacement after 5 years.
Tow Line: 8 metres (minimum length) UV stabilised polyethylene twine.
Antenna: Six stage telescopic, stainless steel and brass.
Mounting Bracket: Quick-release, rustproof, high density polyethelene.
Dimensions: Diameter 90 mm. Height 250 mm (aerial retracted). Gross weight 950 grams. approx.
Satellite Coverage - http://www.kti.com.au/Satellite%20Coverage.htm
Warranty - 5 Years Parts and Labour
There are no refunds or exchanges on these products.
